The Victron Phoenix 12/2000 Inverter Smart is an efficient and reliable inverter. Built on our proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing.
It’s powerful enough to supply most common plug in appliances in your car, boat, RV or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.
Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.
Solar 'N' Sat are an Australian Company who have a dedicated team of professional technicians with 13+ years in the industry!
Fully configurable with a tablet or smartphone
Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 - 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay Monitoring: In and output voltage, load and alarms.
VE.Direct Communication Port: The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven Reliability: The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High Start-Up Power:Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO Mode: When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote On/Off: A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).
LED Diagnosis: Please see manual for a description.
To Transfer the Load to Another AC Source - The Automatic Transfer Switch: For our low power inverters we recommend our Filax Automatic Transfer Switch. The Filax features a very short switchover time (less than 20 milliseconds) so that computers and other electronic equipment will continue to operate without disruption. Alternatively use a MultiPlus with built-in transfer switch.
Parallel and 3-phase operation: No
Input Voltage Range*: 9,3 – 17V 18,6 – 34V 37,2 – 68V Output Output Voltage: 230VAC ±2% 50 Hz or 60Hz ± 0,1%* Cont. Output Power at 25ºC **: 2000VA Cont. Output Power at 25ºC: 1600W Cont. Output Power at 40ºC: 1450W Cont. Output Power at 65ºC: 1000W Peak Power: 4000VA Dynamic (load dependent) DC Low Shut Down (fully configurable): Dynamic cut-off Max. Efficiency: 92% Zero Load Power: 8W Zero Load Power in ECO Mode: 0.6W
Programmable Relay**: Yes Stop & Start Power ECO-Mode: adjustable Protection***: a - g Bluetooth Wireless Communication: for remote monitoring and system integration VE.Direct Communication Port: for remote monitoring and system integration Remote On-Off: Yes Operating temperature range: -40 to +65ºC (fan assisted cooling) Humidity (non-condensing): max 95%
Material & Colour: steel (blue RAL 5012; and black RAL 9017) Protection Category: IP 21 Battery-Connection: M8 bolts 230 V AC-Connection: Screw terminals Weight: 13kg Dimensions: (hxwxd) 485 x 219 x 125mm
Safety: EN 60335-1 Emission Immunity: EN 55014-1 / EN 55014-2/ EN-IEC 61000-6-1 / EN-IEC 61000-6-2 / EN-IEC 61000-6-3 Automotive Directive: ECE R10-5
* Non-linear load, crest factor 3:1 ** Programmable relay that can a.o. be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230 V / 4 A DC rating: 4 A / 35 VDC, 1A / 60VDC *** Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 V AC on inverter output g) input voltage ripple too high