Victron BMV712 Smart Battery Monitor (Black) for two batteries with Bluetooth including shunt. Battery 1 volts, amps, amp-hours and Battery 2 volts.
The Victron BMV712 Smart Black Battery Monitor is the latest high precision battery monitor from Victron. The BMV-712 Smart Black monitors voltage and current of a single battery bank and calculates power, state-of-charge and time-to-go. It also features an additional voltage input that can be used to measure an auxiliary or starter battery voltage, midpoint voltage or temperature with the optional temperature sensor. Data can be transferred to smartphones or computers with the inbuilt bluetooth module and external alarms can be triggered with the relay contact.
Installation is simply a case of connecting the supplied shunt in the negative battery cable, mounting the monitor in a 52mm diameter hole and connecting the wires. An optional wall enclosure is available if surface mounting is preferred.
Bluetooth Inside: With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.
Download the Victron Bluetooth App: Use a smartphone or other Bluetooth enabled device to - customize settings, - monitor all important data on single screen, - view historical data, and to - update the software when new features become available.
Easy to Install: All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.
Midpoint Voltage Monitoring: One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. We recommend our Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries
Very Low Current Draw from the Battery: Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown. After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.
Bi-Stable Alarm Relay: Prevents increased current draw in case of an alarm.
- Battery voltage, current, power, ampere-hours consumed and state of charge
- Remaining time at the current rate of discharge
- Programmable visual and audible alarm
- Programmable relay, to turn off non critical loads or to run a generator when needed
- 500 Amp quick connect shunt and connection kit
- Shunt selection capability up to 10.000 Amps
- VE.Direct communication port
- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
- Wide input voltage range: 6,5 – 70V
- High current measurement resolution: 10 mA (0,01A)
- Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings
Supply Voltage Range: 6.5 - 70 VDC
Current Draw, Back Light Off: < 1mA
Input Voltage Range, Auxiliary Battery: 6.5 - 70 VDC
Battery Capacity (Ah): 1 - 9999 Ah
Operating Temperature Range: -40 +50°C (-40 - 120°F)
Measures Voltage of Second Battery, or Temperature, or Midpoint: Yes
Temperature Measurement Range: -20 +50°C
VE.Direct Communication Port: Yes
Bistable Relay: 60V / 1A normally open (function can be inverted)
RESOLUTION & ACCURACY (with a 500 A shunt)
Current: ± 0,01A
Voltage: ± 0,01V
Amp Hours: ± 0,1 Ah
State of Charge: (0 – 100%) ± 0,1%
Time to Go: ± 1 min
Temperature (0 - 50°C or 30 - 120°F): ± 1°C/°F
Accuracy of Current Measurement: ± 0,4%
Accuracy of Voltage Measurement: ± 0,3%
INSTALLATION & DIMENSIONS
Installation: Flush mount
Front: 63mm diameter
Front Bezel: 69 x 69mm (2.7 x 2.7 inch)
Body Diameter and Depth: 52mm (2.0 inch) and 31mm (1.2 inch)
Protection Category: IP55 (not intended for outdoor use)
Safety: EN 60335-1
Emission/Immunity: EN 55014-1 / EN 55014-2
Automotive: ECE R10-4 / EN 50498
Shunt (included): 500A / 50mV
Cables (included): 10 meter 6 core UTP with RJ12 connectors, and cable with fuse for ‘+’ connection
Temperature Sensor: Optional (ASS000100000)